Our instructions page has moved here.


C-Loop / C-Loop HD

1. Attach Strap to C-Loop. 

2. Fasten on to tripod mount.  

*Make sure to check the tightness of the C-Loop on camera before each use.

- Check and tighten your C-Loop before EVERY shoot, as this will ensure that the C-Loop is tightly fastened. The C-Loop is designed to securely attach to your camera & M-Plate Pro, however it can still become loose after use. This will help prevent any headaches and dropped cameras due to the C-Loop becoming loose. If your C-Loop has issues staying tight or rotating properly, stop using immediately and contact support.

- To many photographers, the C-Loop is an everyday tool. Losing your washer or having it wear out is something that can happen over time. If you find yourself in this situation, don't worry! We have replacement C-Loop washers available here.

- The C-Loop and the C-Loop HD can become squeaky over time. This is easily fixed with a touch of lubricant. Maintenance:
Flip up the handle and put a drop of your favorite lubricant (Tri-Flow, WD-40, etc) in the gap between the top portion and the body (see picture). Give it several rotations to make sure the lube has penetrated most of the surface under the gap since the tolerance is so tight. To wipe off the excess: press a napkin/tissue against the top of the body with your finger (handle still up) and twist the body. Repeat until the top of the body is free of lube.



M-Plate Pro

Fasten the M-Plate to the bottom of the camera with the arrow facing forward towards the lens. 

Use the arm mounting hole to attach the C-Loop or other tripod strap or carrying systems. Built-in Manfrotto RC2 and Arca-Swiss quick release mounts will be accessible.

The other five mounting holes can be used to attach other tripod plates or accessories. See video here.

Note: all mounting holes are standard camera tripod 1/4"-20 threads.

M-Plate Hand Strap Mount Attachment

Insert the hand strap mount attachment into the M-Link Port™ and fasten with the provided hex tool and bolt.


Split Strap for Cameras 

Included are two pairs of adjustable strap ends to suit your carrying and shooting preferences. 

1. Detach the strap end from the rotating buckle. Slide the loop end through the mounting point.

2. Pass the other end of the strap through the loop. Tighten the loop.

3. Re-attach the buckle to the strap. Repeat on other sides.


Split Strap Gliding Camera 

Download PDF: English


Here is a video on how to detach the C-Loop from the quick attach buckle.


Split Strap for Laptop and Messenger Bags 

1. Use hook end to attach strap to mounting point of bag. 

2. Repeat on both sides and adjust length as necessary. 


Split Strap Heavy Duty for Travel and Duffel Bags

1. Use hook end to attach strap to mounting point of bag. 

2. Repeat on both sides and adjust length as necessary. 


Split Strap for Guitars 

The Guitar Split Strap works on all guitars ranging from electric to acoustic. 

1. Attach the strap ends with the holes on to the strap knobs of your guitar. The strap end with the quick release buckle is used for the front. 

2. Alternatively, the quick release strap can be used. Detach the quick release end and loop under your strings around the headstock and re-attach to strap. 

3. Adjust the length of the strap to suit your playing position.


Split Strap Arm Sling Download PDF: English